5L PET Bottle Blow Molding Machine

Semi-Auto Bottle Blow Molding Machine 1.Capacity:300-800pcs/h 2.For 0.1L -5L PET bottle 3.Mould ( OEM)

CM-9A Semiautomatic bottle blow molding machine Specification: CM-9A semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. 1)  Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the perform, the perform rotated and heated equally. 2) The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. 3) The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. 4) The machine can be operated in the step-by-step mode and the semi- auto mode. 5) The machine is small with low investment, easy and safe to operate by one person.

Parameters of the machine

TYPE	ITEM	MEASUREMENT	CM-9A
END PRODUCT	Material	------	PET
	Volume	L	0.1-5L(1-cavity)
	Theoretical output	pcs/h	300-800
	Max.length	mm	400
	Max.diameter	mm	10-160
MOULD PLATE	Max.mould plate dimension(L*H)	mm	400*460
	Max.mould thickness	mm	300
	Clamping force	KN	65
	Mould opening stroke(Adjustable)	mm	280
AUXILIARY	High pressure compressor	M3/Mpa KW	>=1.2/3.0*1sets 15
	Air cooling dryer	M3/Mpa KW	>=1.0/3.0*1set 0.375
	Precision air filters	M3/Mpa	>=1.0/3.0*2pcs
	Dimension(L*W*H)	M	2.2*1.9*2.2
MAIN MACHINE ELECTRICITY	Power	KW	17.50
	Voltage/Frequency	V/HZ	220-380/50-60
MACHINE SIZE AND WEIGHT	Blow unit dimension(L*W*H)	M	1750*670*1860
	Blow unit weight	T	0.6
	Pre-heater weight	T	0.25
	Pre-heater dimension(L*W*H)	M	1870*630*1450

All of the electrical components adopts CE,CCC,ISO approved international advanced-tech products

5L PET Bottle Blow Molding Machine